| Customization: | Available |
|---|---|
| Application: | Lubrication |
| Base Oil Type: | Mineral Oil |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
SINOPEC Premium Golden Grease, NanoShield is a multi-purpose grease derived from advanced nanotechnology. It is prepared through the saponification of high-activity Nano-precursors and special fatty acid that forms compact and stable metal soap fibers in high quality mineral base oil. Due to special properties of nanoparticles, SINOPEC premium golden grease, nanosield can provide excellent anti-wear protection, superior lubricity, as well as outstanding mechanical stability, water resistance, adhesion, sealing and rust resistance.
Technical Features
· Excellent lubricity to reduce abrasion between friction pairs.
· Excellent resistance to water washout, improved lubricity even under conditions such as high ambient humidity and inevitable contamination with water.
· Outstanding oxidation stability to ensure longer service life during application process.
· Outstanding mechanical stability under harsh shearing forces.
· Superior rust resistance capability to prevent wear of the friction pairs during the operation.
· Good adhesiveness within the applicable temperature range.
Applications
· Suitable for the lubrication and the protection of low speed equipment such as con- struction machinery, agricultural machinery, ceramics (such as polishing machines, transmission bearings) , metallurgy (such as conveying roller table) , automobile
(chassis, wheel hub) and conventional general machinery, etc.
· Application where the temperature range is from -20ºC~120ºC.
Typical Properties
| Premium golden grease | ||
| NLGI grade | 2 | 3 |
| Worked penetration (25ºC) , 0.1mm, ASTM D217 | 287 | 235 |
| Oil separation (100 ºC, 24hrs) , % (m/m) , ASTM D6184 | 0.4 | 0.2 |
| Similar viscosity (-15ºC, 10s-1) Pa·s, ГOCT 7163 | 450 | 782 |
| Impurity entries (microscope method) , ГOCT 9270 | ||
| 25μm above/cm3 | 280 | 320 |
| 75μm above/cm3 | 40 | 40 |
| 125μm above/cm3 | 0 | 0 |
| Prolonged cone penetration (100, 000 times) , 0.1mm, ASTM D217 | 313 | 260 |
| Dropping point, ºC, ASTM D2265 | 165 | 169 |
| Corrosion (T2 copper, 100 ºC, 24hrs) , ASTM D4048 | Pass | |
| Water washout (38ºC, 1h) , % (m/m) , ASTM D1264 | 0 | |
| Evaporation loss (99ºC, 22h) , % (m/m) , ASTM D972 | 0.08 | 0.05 |
| Oxidation stability (99ºC, 100hrs, 0.758MPa) , Pressure drop, MPa, ASTM D942 | 0.015 | 0.025 |
| Corrosion resistance (52ºC, 48h) , ASTM D1743 | Pass | |
| Four ball wear (392N, 60min) , mm, ASTM D2266 | 0.48 | 0.45 |
These data are given as an indication of typical values, not as exact specifications.
){kind=link}