These data are given as an indication of typical values, not exact specifications.
Applications
Sinopec TULUX T600 CK-4 15W-40 Diesel Engine Oil is suitable for use in:
Heavy duty diesel engines (HDDE) fitted with exhaust after-treatment systems, e.g. exhaust gas recirculation (EGR),
diesel particulate filters (DPF) or selective catalytic reduction (SCR), which require a low-ash lubricant to meet Euro V
& Euro VI or Australian ADR 80/02 and 80/03 emissions requirement.
Heavy duty diesel engines operating continuously under very high speed, high temp or heavy load conditions,
including on and off highway, trucking, bus, mining, construction, agriculture and marine applications in the world's
harshest environment.
Fully backwards compatible to those older HDDE using conventional designs without exhaust after-treatmentsystems.
Heavy duty diesel engines requiring API CK-4, CJ-4 and earlier categories.
Features and benefits
By using Synthetic Technology hydrocracked base oils and the superior additive packages, Sinopec has produced the
most advanced mixed fleet DEO seen in the market for over a decade:
Low SAPS, meeting Euro V/VI, Australian ADR 80/02 and 80/03.
Extended long term protection and proven longevity of DPF and SCR.
Excellent oil oxidation resistance and improved control of the piston deposits, preventing formation of sludge and
piston deposits, keeping engine clean and reducing energy loss.
High performance in both on and off-highway heavy-duty applications.
Extended drain intervals, reduced downtime and increased profitability.
Also
available
in bulk
Product Data Sheet
The information contained herein is subject to change without notification due to continuing
research & development therefore properties may be subject to slight variations.
PERFORMANCE IN MOTION
Page 2
Typical data
Sinopec TULUX T600 CK-4 15W-40 Diesel Engine Oil
SAE grade 15W-40
Kinematic viscosity, cSt @ 100ºC, ASTM D 445 14.75
CCS, cP @ -20ºC, ASTM D5293 5160
MRV, cP @ -25ºC, ASTM D4684 19500
High-temperature, high-shear viscosity (HTHS), cP @ 150ºC, ASTM
D4683
3.75
Total base number, mg KOH/g, ASTM D 2896 8.64
Pour point, ºC, ASTM D 97 -33
Flash point (COC), ºC, ASTM D 92 230
These data are given as an indication of typical values,not as exact specifications.
Industry and OEM specifications
Sinopec TULUX T600 CK-4 15W-40 Diesel Engine Oil meets the performance requirements of the following
industry specifications:
Diesel: CK-4, CJ-4, CI-4 Plus, CI-4, CH-4, CG-4, CF-4 and earlier HDDEO specifications
Accuracy of information
Data provided in this PDS is typical and subject to change as a result of continuing product research and development. The
information given was correct at the time of printing. The typical values given are subject to variations in the testing procedures
and the manufacturing process may also result in slight variations. Sinopec guarantees that its lubricants meet any industry and
OEM specifications referred to on this data sheet.
Sinopec cannot be held responsible for any deterioration in the product due to incorrect storage or handling. Information on best
practice is available from your local distributor.
Product and environmental safety
This product should not cause any health problems when used in the applications suggested and when the guidance provided
in the Safety Data Sheet (SDS) is followed. Please consult the SDS for more detailed advice on handling; SDSs are available
from your local distributor. Do not use the product in applications other than those suggested.
As with all products, please take care to avoid environmental contamination when disposing of this product. Used oil should be
sent for reclamation/recycling or, if not possible, must be disposed of according to relevant government/authority regulations.
The SINOPEC trademark is registered and protected.
Audited Supplier 
){kind=link}
){kind=link}