| Type: | Industrial Oil |
|---|---|
| Source: | Liquid Mineral Lubricants |
| Composition: | Base Oil |
| Property: | Extreme Pressure Lublicating Oil |
| Certification: | SAE |
| Shape: | Liquid |
| Customization: |
|---|
Suppliers with verified business licenses
Audited Supplier Sinopec AE Hydraulic Oil HC is a line of premium quality antiwear fluids formulated with highly refined high-quality mineral oils and a multifunctional additive system. Available in four ISO viscosity grades: 32, 42, 68 and 100. This line of oils, with high viscosity indexes and low pour points, has been designed to meet the requirements of moderate- to high-pressure hydraulic systems operating outdoors, or in areas where there is a wide variation in the ambient temperature. Especially, the cleanliness is less than ISO 4406 18/16/13.
Sinopec AE Hydraulic Oil HC is suitable for use in:
·Hydraulic applications in a wide variety of industrial, marine and mobile equipment.
·Vane and gear pumps operating under high loads, as recommended by pump manufacturers.
·Severe service hydraulic systems, employing axial and radial piston pumps, as recommended by pump manufacturers.
High-quality base oils combined with multifunctional additive technology provide outstanding antiwear properties, rust protection, low varnish and deposit formation, good demulsibilit, good antifoam properties and fast air release properties, to protect and extend the life of hydraulic pumps and systems.
·Excellent oxidation stability, providing longer service life of oil.
·High level of cleanliness, preventing contamination from damaging system components.
·Good hydrolytic stability and filterability, ensure optimum product life and performance, and prevent filter blocking.
·The wide selection of viscosity grades ensures that the optimum viscosity can be used for any hydraulic system operating temperature.
·Fully compatible with common seal materials usually found in hydraulic systems, to extend seal life and prevent fluid leakage.
·Better cleanliness.
| Sinopec AE Hydraulic Oil HC | ||||
| ISO viscosity grade | 32 | 46 | 68 | 100 |
| Kinematic viscosity, ASTM D 445 | ||||
| cSt @ 40ºC | 32.28 | 46.49 | 67.1 | 102.5 |
| cSt @ 100ºC | 5.75 | 7.033 | 9.36 | 12.86 |
| Viscosity index, ASTM D 2270 | 120 | 123 | 118 | 121 |
| Air release at 50ºC, mins, ASTM D 3427 | 3.1 | 2.6 | 8.8 | - |
| Foaming characteristics, sequences 1, 2 and 3, ASTM D 892 | 0/010/00/0 | 10/010/010/0 | 10/020/010/0 | 0/00/00/0 |
| Neutralisation number, mg KOH/g, ASTM D 974 | 0.69 | 0.72 | 0.71 | 0.72 |
| FZG test (A/8.3/90), fail load stage, DIN 51345 | 12 | >12 | >12 | >12 |
| Rust prevention, ASTM D 665 | ||||
| distilled water | pass | pass | pass | pass |
| synthetic sea water | pass | pass | pass | pass |
| Copper corrosion, 3 hours @ 100ºC, ASTM D 130 | 1b | 1b | 1b | 1b |
| Water separability, ASTM D 2711 | 10 (54ºC) | 10 (54ºC) | 15 (54ºC) | 20 (82ºC) |
| Pour point, ºC, ASTM D 97 | -39 | -39 | -33 | -27 |
| Flash point (COC), ºC, ASTM D 92 | 238 | 246 | 248 | 260 |
| Cleanliness, ISO 4406 | ≤18/16/13 | ≤18/16/13 | ≤18/16/13 | ≤18/16/13 |
Industry and OEM specifications
| Sinopec AE Hydraulic Oil HC L-HM meets the performance requirements of the following industry specifications: | |
| Sinopec | Q/SH 303 550-2013 |
| DIN | 51524 Pt 2 |
| ISO | 11158 (L-HM) |
| Sinopec AE Hydraulic Oil HC meets the performance requirements of the following OEM specifications: | |
| Cincinnati | P-68 (ISO 32), P-69 (ISO 68), P-70 (ISO 46) |
| Eaton Vickers | Eaton 03-401-2010 ( E-FDGN-TB002-E ) (ISO 32) |
Suppliers with verified business licenses
Audited Supplier 
){kind=link}
){kind=link}